440W bifacial Monocrystalline solar panel with 144PCS 9BB M6 mono PERC half cells
FSM430~FSM440M60HL (430W/435W/440W) 9BB M6 MONO PERC Half-Cell PV Module
KEY FEATURES
- 9 Busbar M6 Mono Half-Cell adopts PERC technology to guarantee higher output power and higher module efficiency.
- Mono PERC Half-Cell PV module offers better temperature-dependent performance, less shading effect on the energy generation, lower risk of hot spot.
- Excellent Anti-PID performance guarantee limited power degradation for mass production.
- Around 0.55% annual power degradation and 30 years linear power warranty
- Advanced glass and cell surface textured design ensure excellent performance in low-light environments (e.g. early morning, dusk and cloud, etc).
- Module power increases 5%~25% generally (as per different reflective condition), lower LCOE and higher IRR.
- Light weight design using transparent backsheet for easy installation and low BOS cost.
- 100% EL inspection and power test before packing
Electrical Characteristics under STC
| Module Type | FSM430M72HL | FSM435M72HL | FSM440M72HL |
| Maximum Power-Pmax (Wp) | 430 | 435 | 440 |
| Voltage at Maximum Power-Vmp (V) | 40.6 | 40.8 | 41.0 |
| Current at Maximum Power-Imp (A) | 10.60 | 10.67 | 10.74 |
| Open Circuit Voltage-Voc (V) | 49.2 | 49.4 | 49.6 |
| Short Circuit Voltage-Isc (A) | 11.19 | 11.26 | 11.33 |
| Module Efficiency-ηm (%) | 19.5% | 19.7% | 19.9% |
| Operating Temperature | -40℃ to +85℃ |
| Maximum System Voltage | 1000V/1500V DC (IEC) |
| Power Tolerance | 0~+4.99W |
| Temperature Coefficients of Pmax | -0.350%/℃ |
| Temperature Coefficients of Voc | -0.289%/℃ |
| Temperature Coefficients of Isc | 0.048%/℃ |
Mechanical Characteristics
| Cell Type | MONO PERC 166×83mm |
| No. of Cells | 144 (72×2) |
| Dimension | 2108×1048×35mm |
| Weight | 24 Kg |
| Junction Box | IP68, 3 diodes |
| Output Cables | 4.0mm², 500mm Length (Optional) |
| Connectors | MC4 compatible |
| Packing | 32PCS/Pallet, 704PCS/40’HC |
FAQ of Solar Knowledges
Q1: How much extra power can get for bifacial solar panels?
A: The extra power generation gain comes from the rear side exactly. It depends on the reflectivity of back. If the project is installed on water, it can only get 5% extra power generation. If the project is installed on sand-gravel ground, it can get approx. 20% extra power generation.
Q2: Most bifacial solar panels are produced with dual glasses, is yours much heavier than normal solar panel?
A: It's the truth that bifacial solar panel with dual glasses is about 4KG heavier. But, the bifacial solar panel from Finergy is produced with mesh backsheet. It's light weight design for solar power plants installation. The weight is same as normal solar panels. But, extra power generation gains from rear side.
Q3: What is the life time?
A: Finergy's bifacial solar panel with mesh backsheet passed aging resistance test as well. It can provide same warranty, 15 years lift time and 30 years linear power warranty.
Production & QC
Projects Installed with Finergy Solar Panels
Product Tags:
|
|
144 Cell Perc Mono Double Glass Bifacial Solar Panels On Roof 9BB M6 440 Watt 430W 435W Images
|
