FSM430~FSM440M60HL (430W/435W/440W) MONO PERC Half-Cell Bifacial PV Module
KEY FEATURES
- Bifacial 9 Busbar M6 Mono Half-Cut Solar Cell adopts PERC technology to guarantee higher output power and higher module efficiency.
- Mono PERC Half-Cell PV module offers better temperature-dependent performance, less shading effect on the energy generation, lower risk of hot spot.
- Excellent Anti-PID performance guarantee limited power degradation for mass production.
- Double glasses encapsulation guarantees 20 years life time warranty and 30 years linear power warranty.
- Advanced glass and cell surface textured design ensure excellent performance in low-light environments (e.g. early morning, dusk and cloud, etc).
- Module power increases 5%~25% from backside (as per different reflective condition), lower LCOE and higher IRR.
- Three channels of automatic EL detections and final power test before packing.
- Barcode, material and parameter binding data traceable, searchable and freezing
Electrical Characteristics under STC
| Module Type | FSM430M72HL | FSM435M72HL | FSM440M72HL |
| Maximum Power-Pmax (Wp) | 430 | 435 | 440 |
| Voltage at Maximum Power-Vmp (V) | 40.6 | 40.8 | 41.0 |
| Current at Maximum Power-Imp (A) | 10.60 | 10.67 | 10.74 |
| Open Circuit Voltage-Voc (V) | 49.2 | 49.4 | 49.6 |
| Short Circuit Voltage-Isc (A) | 11.19 | 11.26 | 11.33 |
| Module Efficiency-ηm (%) | 19.5% | 19.7% | 19.9% |
| Operating Temperature | -40℃ to +85℃ |
| Maximum System Voltage | 1000V/1500V DC (IEC) |
| Power Tolerance | 0~+4.99W |
| Temperature Coefficients of Pmax | -0.350%/℃ |
| Temperature Coefficients of Voc | -0.289%/℃ |
| Temperature Coefficients of Isc | 0.048%/℃ |
Mechanical Characteristics
| Cell Type | MONO PERC 166×83mm |
| No. of Cells | 144 (72×2) |
| Dimension | 2108×1048×35mm |
| Weight | 28 Kg |
| Junction Box | IP68, 3 diodes (3*20A) |
| Output Cables | 4.0mm², 500mm Length |
| Connectors | MC4 compatible |
| Packing | 32PCS/Pallet, 704PCS/40’HC |
FAQ of Bifacial Solar Panels
Q1: How much additional power generation for bifacial solar panels?
A: Finergy bifacial solar panels can help you get extra power generation from rear side. The additional power gain depends on the albedo of materials on rear side, up to 25% additional power generation gain from the rear side.
Q2: Because of dual glasses, is it too heavier to move?
A: For bifacial solar panels with dual glasses from Finergy, both glasses are 2mm thickness, totally 4mm. But for normal solar panels, the glass is 3.2mm thickness. In this case, it's only 4kg heavier.
Q3: Where to install bifacial solar panels best?
A: Finergy recommends customers to install bifacial solar panels with dual glasses on ground mounted and floating solar PV stations. For ground mounted PV plants, you can obtain 9% additional power from rear side on sand ground. For floating solar PV stations, glass is much more dependable on life time. Besides this, you can get 5% additional power from rear side of water.
Automatic Production Dispaly
Reference
Product Tags:
|
|
Mono Perc Bifacial N Type Solar Panel Dual Glass 440W 9BB M6 Half Cell PV Module Images
|
